This Article Applies to:
Archer C5400 , Archer A2600 , Archer AX55 , Archer AX53 , Archer AX10 , Archer AX51 , Archer AX96 , Archer AXE95 , Archer AX10000 , Archer C3150 , Archer AX50 , Archer C7 , Archer AX90 , Archer AX6000 , Archer C5400X , Archer A20 , Archer C2600 , Archer AX1800 , Archer AX206 , Archer AX4200 , Archer C3200 , Archer AX75 , Archer AX4400 , Archer AX73 , Archer A10 , Archer AX4800 , Archer A2300 , Archer AXE75 , Archer A2600 Pro , Archer A7 , Archer AX72 , Archer AXE5400V , Archer AXE200 Omni , Archer A9 , Archer AX68 , Archer C2300 , Archer AX5300 , Archer AX23 , Archer AX3000 Pro , Archer AX20 , Archer C4000 , Archer AX21 , Archer AX3000V , Archer Air R5 , Archer AXE300 , Archer AX1500 , Archer AX11000 , Archer AX3200 , Archer AX3000
Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
This article contains 2 Topics.
1.Steps to log in to the Router's web management page
2.What to do if web management page is not accessible
1.Steps to log in to the Router's web management page
Step 1. Connect your device to TP-Link router
Connect the device to the router via an Ethernet cable or wireless by using the SSID (network name) and password printed on the bottom label of the router.
Step 2. Access the web management page
It's recommended to use Firefox, Chrome, Edge to access the web management page of router.
Type http://tplinkwifi.net in the address bar, then press Enter.
Step 3. Allow access to the Web GUI
Click the 'Privacy error' page.
Click on Advanced ---- Proceed to tplinkwifi.net (unsafe) Or Advanced ---- Proceed to 192.168.0.1 (unsafe).
A warning message will show as below due to the browser requiring a signed certificate. Please don’t worry about that. The reason why browsers recognize tplinkwifi.net as “Not secure” is that tplinkwifi.net’s Certificate is a self-signed certificate. Most browsers will show this warning because tplinkwifi.net is not an authoritative CA. We can promise that the connection between your browser and the tplinkwifi.net server is secure.
Note: For more information about the self-signed certificate and unsecure notice, please refer to the FAQ here: Why TP-Link HTTPS web interface is detected as unsecure by some web browsers?
Step4.set password for admin account
Set a secure password for the administrator account as required
2. What to do if web management page is not accessible
When you enter the url and press 'enter', only one web page titled 'Connect to a network' was shown. Click 'connect' button doesn't help.
If you encountered this issue, try the below methods.
- Try to log in on the Tether APP
- Change to other web browsers
- Clearing the browser’s cache or use Incognito mode, refer to How do I clear the cache in different Major Browser？
- Try the router’s LAN IP to access such as http://192.168.0.1 instead of http://tplinkwifi.net
Is this faq useful?
Your feedback helps improve this site.
What’s your concern with this article?
- Dissatisfied with product
- Too Complicated
- Confusing Title
- Does not apply to me
- Too Vague
- Other
Thank you
We appreciate your feedback.
Click here to contact TP-Link technical support.
